I have always wondered about this…
I tried a new take on the time lapse video in the last half or so of this one:
Today I spent a lot of time deburring and dimpling the right wing tank skin, stiffeners, and associated parts. I also found that the DRDT-2 works better for screw hole dimpling than the pneumatic squeezer did, so I ran the left wing tank skin back through the screw hole dimpling process, and the holes now look much crisper.
I also got a very nice surprise when Mom and Tim showed up unannounced for a visit and gave me a great little chest that Tim made for me in his wood shop. I’m going to come up with a good use for it that will not damage it. Tim said I should keep it in the workshop but I want to make sure I don’t get it dirty or scratched or damaged in other ways. It really is a nice piece of craftsmanship!
Time lapse of clouds outside the workshop today.
[stream flv=x:/www.brunbergs.net/wp-content/uploads/2015/04/2015-04-05-Timelapse-2-5x.240pni.flv img=x:/www.brunbergs.net/wp-content/uploads/2015/04/SnapShot-300×169.jpg embed=false share=false width=640 height=360 dock=true controlbar=over bandwidth=high autostart=false responsive=16:9 /]